2017 H&S Manufacturing 614 Running Gear - Tandem Axle

Call for Price

H&S Manufacturing
614 Running Gear - Tandem Axle



  • Capacity: 14 Ton
  • Weight W/tires: 1620 lb. W/12.5l
  • Tread Width: 80 in.
  • Spindles: 2.25 in.
  • Hubs: 8 Bolt
  • Bolster: 4 in. X 8 in.
  • C-Reach: 7 Gauge
  • Wheel Base: 119 in. To 159 in. In 10 in. Increments
  • Standard Wheel: 15 X 10
  • Wheel Options: 16.1 X 11
  • Brakes: Optional Hyd. Surge
  • Back Hitch: N/a
  • Telescoping Pole: 77 in. Fixed, Extends To 89 in.
  • H&S tandem models have L-shaped front spindles with structural bracing to withstand high stresses from shock loads.
  • Heavy running gears - models 617 and 622 utilize thrust bearings to assure dependable, smooth turning and straight trailing.
  • The tele-pole is made of structural tubing and the mounting plates have wide spacing between them to reduce sway and increase the strength of the pole.
  • King Pin, Hitch Pin, Spindles, Tie Rod Ends and Tie Rod Steering Pivot Point are all wear protected by replaceable oil impregnated steel bushings and are greaseable as well.
  • Full contact Turn stops distributes the pressure exerted in tight dragging turns along the bolster face - this reduces the possibility of bunk damage or collapse.
  • Running gears from 12 ton on up have 4-bolt brake flanges as standard equipment so that optional hydraulic surge brakes may be installed.
  • The tie rod is positioned behind the bolster on all models and is a one-piece design that reduces the number of wear point that could change the toe-in and tracking.
  • A spring assist is standard on all tandem axle models and it is adjustable from a light assist to full support.
  • Stake pocket wear plates are standard on ALL MODELS!



14 Ton
1620 lb. W/12.5l

Related Products