2017 H&S Manufacturing 2112 V-Rake

Call for Price

H&S Manufacturing
2112 V-Rake



  • Number Of Rake Wheels: 12
  • Wheel Diameter: 60 in.
  • Teeth Per Wheel: 40
  • Tooth Diameter: 7.5mm
  • Rake Wheel Hubs: Tapered Bearings
  • Transport Width: 12 ft.
  • Transport Length: 21 ft. 6 in.
  • Transport Height In Transport Position: 105 in.
  • Raking Width: 20 ft. -24 ft.
  • Windrow Width Adjustment: 4 ft. - 6 ft.
  • No. Of Raking Positions W/transport Position: 10
  • Ground Pressure Rake Wheel Adjustment: Adjustable Tension Spring
  • Action Cylinder - Raise/lower: 4 1/2 in.
  • Wing Cylinders: 2 in.
  • Jack: Standard
  • Weight: 1,860 lb.
  • Center Kicker Wheel: Optional
  • The Rake Arm Pivot Joint provides flexibility for the rake beam in uneven ground conditions unlike most competitors.
  • The Rake Wheel Pivots also provides additional ground flexibility.
  • Raking width on the 1100 series rakes can be adjusted to 3 different positions with the pin and fine-tuned by adjusting the turnbuckle screw. The hitch jack is used to adjust the windrow width.
  • A single acting cylinder coupled with a simple linkage system allows for easy raising and lowering of rake wings.
  • High Clearance Action Rakes features a "KWIK PIK" (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
  • An Adjustable Hitch allows you to level the rake for efficient raking.
  • Right and left side raking is done easily by turning either one of the wing transport valves off.
  • A 49" Center Kicker Wheel is optional on all Action Rakes.
  • Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
  • The hitch jack is used to adjust the windrow width as shown.
  • The operator can adjust the fine tune spring to allow proper rake wheel down pressure on each arm of either rake.



Working Width
12 ft.
1,860 lb.

Related Products