2024 Vermeer TM710

Call for Price

Call for Price

Key Features

New/Used New
Availability In Stock
LocationOwens Implement
Condition Excellent

Product Features

Description

Even before you start mowing, you will experience the simplicity of TM710 trailed mowers. It starts at hookup. Connect the hitch, PTO and hydraulics, and you’re ready to go to the field. Narrow transport widths and toolless suspension adjustments help you mow and go. Horsepower requirements (55 hp [40.4 kW]) are an average of 20% lower than comparable 3-pt disc mowers). Plus, it delivers the consistent, clean cut you’ve come to expect from Vermeer trailed mowers.

Features and Benefits
  • Easy hitch hookup: Hitch up easily. The hookup procedure is straightforward; after the hitch, PTO and hydraulics are connected it's ready to go to the field.
  • Low horsepower requirements: Goes easy on horsepower, only requiring a 55 hp (41 kW) tractor for a 9.2 ft (2.8 m) cut.
  • Hydraulic swing cylinder: Maneuvers around obstacles with ease, thanks to the hydraulic swing cylinder.
  • Patented rubber torsion design: Absorbs shock loads with a patented rubber torsion design that keeps the weight of the cutter bar on the ground until it needs to float over field obstacles.
  • Quick-Clip blade retention system: Replace blades in seconds using the exclusive Quick-Clip™ blade retention system.
Dimensions and Weights
  • Transport Height: 46 in (116.8 cm)
  • Transport width - standard: 9.4 ft (2.9 m)
  • Transport Length: 15.3 ft (4.7 m)
  • Cutting Width: 9.2 ft (2.8 m)
  • Working Height: 46 in (116.8 cm)
  • Working Width: 13.6 ft (4.1 m)
  • Working Length: 14.3 ft (4.4 m)
  • Total Weight: 2200 lbs (997.9 kg)
  • Tongue Weight: 630 lbs (285.8 kg)
  • Suspension: Rubber torsion
  • Torque Protection: Driveline: friction disc clutch
  • Tires: 27x9.5-15
Tractor Requirements
  • Tongue/hitch: Drawbar
  • Drive PTO: 540 rpm
  • PTO horsepower recommended: 55 hp (41 kw)
  • Hydraulic Type: 2 double-acting (1 double-acting with optional kit)
  • Hydraulic Pressure: 1250 psi (86.2 bar)
  • Hydraulic flow rate: 6 gpm (22.7 L/min)
Cutter bar
  • Cutter bar type: Standard
  • Cut height: 1.3 in - 3 in (3.2 cm - 7.6 cm)
  • Number of Discs: 7
  • Disc Diameter: 19.7 in (50 cm)
  • Disc Speed: 2797 rpm
  • Number of Blades: 14
  • Angle Adjustment: Manual turnbuckle
  • Quick Clip® blade retention system: Standard
  • Curtain material: 1 ply 1/8 in rubber
  • 3-year limited cutter bar warranty: Standard
Features
  • Optional swath formation: Optional swathboard
  • Skid Shoes: Standard modular independent skid shoes; Optional topping wear skids

General

Working Width 9.2 ft. (2.8 m)
Length 14.3 ft. (4.4 m)
Weight 2200 lb. (997.9 kg)

Shopping Tools